|
|
|
|
|
|
4" Neoprene Pad - ACM-NP-401-50 Durometer
|
|
|
4" Neoprene Pad used for unbonded concrete cylinder compressive strength testing.
Durometer: 50
Strength: 1500 to 6000 psi
Number of uses: 100 (50 per side)
|
|
|
|
|
|
|
|
|
|
4" Neoprene Pad - ACM-NP-401-60 Durometer
|
|
|
4" Neoprene Pad used for unbonded concrete cylinder compressive strength testing.
Durometer: 60
Strength: 2500 to 7000 psi
Number of uses: 100 (50 per side)
|
|
|
|
|
|
|
|
|
|
4" Neoprene Pad - ACM-NP-401-70 Durometer
|
|
|
4" Neoprene Pad used for unbonded concrete cylinder compressive strength testing.
Durometer: 70
Strength: 4000 to 7000 psi
Number of uses: 100 (50 per side)
Strength: 7000 to 12000 psi
Number of uses: 50 (25 per side)
|
|
|
|
|
|
|
|
|
|
4" Canvas Wrap - ACM-CW4
|
|
|
Canvas-nylon cylinder wrap for 4" diameter concrete test cylinders prevent damage to the cylinder in transit & minimizes shattering while being tested for compressive strength. Wraps are secured by velcro strips.
Shipping Info: 8" x 8" x 8) - 1 lbs.
|
|
|
|
|
|
|
|
|
|
6" Canvas Wrap - ACM-CW6
|
|
|
Canvas-nylon cylinder wrap for 6" diameter concrete test cylinders prevent damage to the cylinder in transit & minimizes shattering while being tested for compressive strength. Wraps are secured by velcro strips.
Shipping Info: 8" x 8" x 8) - 1 lbs.
|
|
|
|
|
|
|
|
|
|
6" Neoprene Pad - ACM-NP-601-50 Durometer
|
|
|
6" Neoprene Pad used for unbonded concrete cylinder compressive strength testing.
Durometer: 50
Strength: 1500 to 6000 psi
Number of uses: 100 (50 per side).
|
|
|
|
|
|
|
|
|
|
6" Neoprene Pad - ACM-NP-601-60 Durometer
|
|
|
6" Neoprene Pad used for unbonded concrete cylinder compressive strength testing.
Durometer: 60
Strength: 2500 to 7000 psi
Number of uses: 100 (50 per side)
|
|
|
|
|
|
|
|
|
|
6" Neoprene Pad - ACM-NP-601-70 Durometer
|
|
|
6" Neoprene Pad used for unbonded concrete cylinder compressive strength testing.
Durometer: 70
Strength: 4000 to 7000 psi
Number of uses: 100 (50 per side)
Strength: 7000 to 12000 psi
Number of uses: 50 (25 per side)
|
|
|
|
|
|
|
|
|
|
Capping Compound - ACM-CAP
|
|
|
High strength capping compound comes in flake form with compressive strengths in 2 hrs. of an 8,000 psi average using the 2" cube method.
When heated to optimum temperature it becomes a smooth, free flowing liquid that precisely conforms to capping molds, assuring a cap that will evenly apply compressive forces to the entire specimen. The flake form provides virtually dust free handling, easy storage and does not attract moisture like dry powder mixes.
Blended in a molting state to provide guaranteed consistency with minimum shrinkage and higher density to yeild more caps per pot and less odor. Each batch is thoroughly tested before shipping for quality you can trust.
Conforms to ASTM C287 C617 C307 & AASHTO T-231
Shipping Info: 17" x 17" x 10" - 55 lbs.
|
|
|
|
|
|
|
|
|
|
4" Steel Retainer Ring - ACM-CS-RC-4
|
|
|
4" steel retainer rings used for unbonded concrete cylinder compressive strength testing.
|
|
|
|
