Ensure Proper Grout Sampling

Flow Cone Set (Economy Priced!)

ASTM C 939 Procedure

This unbreakable polyethylene cone is economy priced, easy to use, and cleans up with ease.

The ACM-FC-1K Flow Cone Set is for field and laboratory measurements of flowability of fluid hydraulic grouts used in preplaced aggregate concrete. The flow cone method is for use with grouts having 35 sec. or less efflux time. Cone with special 3/4" inch orifice is also available.

Includes: Polyethylene cone, stainless steel discharge tube, steel ring stand, point gauge fluid level indicator, and instructions.

ACM-FC-1K  Complete flow cone set
(Specify 1/2" or 3/4" orifice)

ACM-FC-01  Flow cone only

ACM-FC-R  Large steel ring stand

ACM-PG-1  Point gauge level indicator

• Proven by tests to yield comparable compressive strength values to samples cast by traditional method regardless of CMU moisture content
• Consistent, identical prism geometry is created with every set of samples
• Engineered slotted corrugation retains moisture while closely simulating CMU absorption rate
• Performs as mold and transport / shipping container in one
• Saves money, time, labor and space
• Assembles easily, ships and stores flat
• Yields an additional specimen as a reserve
• See page 7 for compression ring set
• Meets  ASTM C-1019-09, section 6

ACM-GSB  Grout Sample Box - per case

Custom fabricated out of high density polyethylene and clear acrylic plate

ACM-37
Effective plate area 6" xx 29.5" Meets ASTM C1339-96

ACM-37

ACM-37S
Similar to above, but a much smaller version.
Effective plate area 3” x 7 1/2”

ACM-37S