Capping Frames |
| |
|
|
- Built to last
- Bottom plate disassembles for easy machining
ACM-CP002-3 Capping Frame
ACM-CP004 Capping Frame
ACM-CP006 Capping Frame
|
| |
|
|
| |
|
Capping Compound |
|
| |
|
|
HYTECH High Strength Capping Compound is in
flake form with compressive strengths in 2 hours
of 8,000 psi average using 2" cube method. This
compound is blended in a molten state providing a
guaranteed consistency with minimum shrinkage,
higher density which yields more caps per pot and less odor.
Compliance C617 & C287
ACM-CAP Capping Compound - 50 lb. bag |
| |
|
|
| |
|
One-Piece Ladle |
|
| |
|
|
Deluxe heavyweight 18/8 stainless steel 8oz. ladle
ACM-7748 Ladle |
| |
|
|
| |
|
Unbonded Capping System Kap-It |
| |
|
|
- Reusable
- Economical
- Odorless
- Accurate
- Cleaner
- Accepted
50, 60, and 70 durometer are available. 60 durometer is recommended for
anticipated strengths from 2,500 through 7,000 psi.
Note: Compression machines must have 141⁄4" plus clearance between platens
to use unbonded capping system.
Unbonded Capping System - 12 or more
Call for larger quantity pricing |
| |
|
|
| |
|
Cap and Pad System for Compression Testing |
| |
|
| Model |
Description |
| ACM-CS600 |
6" Complete set |
| ACM-CS400 |
4" Complete set |
| ACM-CS300 |
3" Complete set |
| GSB Set |
Grout Sample Cap and Pads (pads only also sold separately) |
| ACM-23K |
2" Square complete set |
| ACM-NP601 |
6" Neoprene pads |
| ACM-NP401 |
4" Neoprene pads |
| ACM-NP301 |
3" Neoprene pads |
| ACM-24 |
2" Square (4 pads) |
|
| |
|
|
| |
|
| Block Cap |
|
| |
|
 |
- Convenient and Uncomplicated. No Mixing, Cutting or Measuring
- Clean and Economical, Saving Time and Labor
Accurate and Consistent. Based on Comparison tests this unit indicates excellent results versus capping with hydrocal gypsum performed according to astm C140. The block cap compression pad is a fiberous composite laminated to a tough plastic sheeting. The composite flows into the irregularities of the cmu, thus distributing the test load uniformly - with no damage to the cell stems.
The plastic sheeting provides rigidity and provides protection to machine platens.
CAT# |
Block Size |
PCS/CTN |
BC08 |
8"x16" |
20 |
BC12 |
12"x16" |
20 |
|
| |
|
| |
|
| |
|
