Air-Meter (Type B) |
| |
|
|
The AR-B AIR-METER is one of the most precise air measuring devices available for concrete. With heat treated cast aluminum construction and cast in handles on base, the AR-B is heavy duty, yet lightweight, and easy to handle.
Our unit utilizes the best clamping system available, with large stainless steel clamp levers and a holding capacity of 2500 lbs. each. This clamping system provides easy, dependable operation.
Employing the use of a superior high volume Ultra Pump, this system makes operation rapid and easy. This includes a larger, more accurate pressure gauge, bourdon tube, and an easy reading color dial face coded for entrapped and entrained air.
Our unit is furnished complete with a carrying case, instructions, and
equipment needed to perform calibration and tests.
Trade-ins
Welcome!
Conforms to
ASTM C231 &
AASHTO T-152
ACM-6
(Complete Kit) CALL FOR PRICE
ACM-6A
(Air Meter Only)
|
| |
|
|
| |
|
Molded Case for Type B Pressure Meter |
| |
|
|
- Precisely molded polyethylene case with inner molded reinforced walls to hold the meter and accessories in place.
- Bowl and meter cover stored apart to eliminate bowl from bonding with
cover gasket.
- Case designed to fit all pressure meters except Type A (Protex) Meters.
- Replaceable plastic case clamps.
- Light weight, long life, rust-free!
ACM-6 38P
Type B Pressure Meter Molded Case |
| |
|
|
| |
|
Type B Pressure Meter Complete Kit |
| |
|
|
- Type B Pressure Meter
- Molded plastic case
- Instructions
- Calibration equipment
Calibration vessel
Inside calibration vessel tube
Outside calibration vessel tube
- Syringe 3 oz.
- Strike off bar
- 24" Tamping Rod
- 16 oz. Rubber Mallet
ACM-6 Type B Pressure Meter Complete Kit |
| |
|
|
| |
|
Gauge Protectors |
|
| |
|
  |
Gauge Protectors
|
| |
|
|
| |
|
Plastic Strike-Off Plates |
|
| |
|
|
12" x 12"
14" x 14"
|
| |
|
|
| |
|
Chace Air
Indicator |
| |
|
|
AASHTOT199
Our Chace Air Indicator Kit is recommended for fast estimating of air content of fresh concrete at the plant or jobsite. A sample is placed in the brass measuring cup on the back of the stopper. The stopper is placed in the glass tube, and the tube is filled with isopropyl alcohol. Percent air is determined by the number of lines the alcohol drops in the stem of the vial after shaking. Instructions and percentage air chart are included in kit.
ACM-A1100 Complete Kit
ACM-A1101 Air Indicator Only
ACM-A102 Tube Only |
| |
|
|
| |
|
Volumetair |
|
| |
|
|
Easily measures entrained air in ANY type of concrete
- Ultra lightweight: Weighs one third of brass unit. Weighs one half of "lightweight" aluminum unit
- Accurate: Meets ASTM C-173
- State of the art design: No threads to strip, easy to use, expansion plug top, all stainless steel, "V" clamp securely holds unit top and bottom together, leak-proof "O" ring design, can be rolled on clamp smoothly and easily
- Low cost: half the cost of other models
- Easy to clean: PVC and fiberglass reinforced plastic construction makes water clean-up easy; can be dipped in
muriatic acid for periodic cleaning
Specifications
Net weight of meter: 5.5 lbs.
Height: .24.25"
Diameter at middle: 7.25"
Volume of base: 2200 mL,
134 cu. in.
Sight Tube: .0-9%
|
| |
|
|
| |
|
THE VOLUMETAIR KIT |
|
| |
|
|
The Volumetair Kit contains:
Meter, Funnel, Syringe, Tamper,
Calibrated cup, Mallet, Plastic
case, Strike off bar
ACM-4K
Volumetair Kit |
| |
|
|
| |
|
TYPE A PRESSURE METER |
|
| |
|
|
- Conforms to the ASTM-C231 Type A
- Light weight aluminum design
- New interchangeable parts with Protex - Conchem meters.
(No longer manufactured)
ACM-5
Type A Pressure Meter Only |
| |
|
|
| |
|
Type A Pressure Complete Kit |
|
| |
|
 |
ACM-5 Complete Kit contains:
Meter, Calibration Vessel, Rod,
Scoop, Strike Off Bar, Mallet, and Instructions
ACM-5 Kit
Type A Pressure Full Meter Kit. |
| |
|
|
| |
|
Pro
Cali-Can |
|
| |
|
|
This brass reusable calibration vessel can be used with any 1⁄4 cubic foot concrete air entrainment pressure
meter.
This precisely machined calibration vessel of 354 mL is exactly 5% air by volume when placed in any 1/4 cubic foot pressure
meter bucket (base). You can make quick and easy checks by placing this vessel upright at the bottom of your pressure meter bucket. The best way is to place Pro Cali-Can in an already water-filled meter bucket. Place the pressure meter cover on the bucket, latch, top off meter with water, and continue to operate your pressure meter as you would normally do taking a test.
Use two Pro Cali-Cans if you would like to check at 10%.
ACM-40P Pro Cali-Can |
| |
|
| |
|
