1
1
index.html1more-products.html1


Aggregate Washers & Crack Monitors

(click on images for larger photo)

Table Top Aggregate Washer

   

Table Top Aggregate Washer

Aggregate washers are used to remove clay and other particles by gently agitating the specimen in a revolving drum until all particles are washed and separated and the overflow water runs clear.

The smaller version aggregate washer is unique in that the drum can be removed for weighing the sample. The smaller size also allows placement on a counter top next to a sink drain. Because of its compact size and light weight, the washer can be moved easily if space is a concern.

A new accessory, a vacuum lid allows the user to turn the washer into a pycnometer. The washer and vacuum lid combination is much quicker than the vibrating table used in most labs and it can also handle larger samples if needed.

Features:

  • Removable Stainless Steel Drum
  • Stainless Steel gooseneck water tube with swivel connection
  • Permanent water connect with regulator valve
  • Fixed tilt position
  • Tubing and Saddle Valve to hookup to existing water line
  • 6 ft. Power Cord with GFCI plug

What is a GFCI plug?

GFCI stands for Ground Fault Circuit Interrupter. GFCI’s protect you from electric shock by interrupting the circuit in less than a 40th of a second if it detects any difference in electricity between that coming in on the “hot” line and going out on the “neutral” line.

Specifications:

Dimensions............................ 18: L x 12 1⁄2"W x 16" H
S.S. Drum ............................. 9.0” Diam. X 103⁄4” Deep
Net Weight............................. 25 lbs.
Ship Weight........................... 40 lbs.
Electrical ..............................
 115Vac, 50/60 Hz, Single Phase
 220Vac, 50/60 Hz, Single Phase

   

ACM-9050  Aggregate Washer, 115Vac, 50/60Hz
ACM-9051  Aggregate Washer, 220Vac, 50/60Hz


   

Vacuum Lid

 
vacuum lid

Turn your aggregate washer into a vacuum pycnometer with the addition of the lid. The Table top Aggregate washer can be used for determining the specific gravity of bituminous paving mixtures. It is made from clear acrylic and fitted with a rotating vacuum seal, port for connection to a vacuum source and locking tabs.

The Vacuum Lid was designed to fit on the drum of the Table Top Aggregate Washer. Its quiet operation and unique action of the rotating drum allows the samples to tumble under water during the vacuum process and remove air trapped in the sample.

ACM-90506   Stainless Steel Drum
ACM-9055   Vacuum Lid